iDE2ZiF – for iFlash Solo Mod – SD Card up to 1TB+
4,50€
Simplified iFlash mod with iDE Resurrector using iDE2ZiF
I did some research a long time ago on iFlash products
(see my post here)
and the installation was quite involved. With this small adapter, installation is made easier,
and you will be able to install an iFlash Solo much more easily —
NOT INCLUDED
(available here: iflash.xyz).
The other photos are for illustration purposes only.
The iDE Resurrector is not included; it is available here:
iDE Resurrector.
The mod may require an additional wire to stabilize the ground connection
(see the white wire in the illustration photo once installed).
The installation remains similar to an SD mod — you then solder the
SD card reader wires to the micro SD.
By purchasing this board, you are solely responsible for its installation, use and operation.
By purchasing this board we assume you have read the full description below and you know what you are buying 😉.
